Random Thoughts.....What Are You Thinking?
Random Thoughts.....What are you thinking?
Don't make me poke you too!
And why is it still showing Goblin? I just changed and updated a few hours ago!
http://www.ffxivpro.com/player/Excalibur/Mikado-Parvenu
http://www.ffxivpro.com/player/Excalibur/Mikado-Parvenu
Valefor.Sehachan said: »
Why did you say miss twice? *sighs*
Table mesa.
Moon Moon.
Bear Bear Bear.
Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo.
James while John had had had had had had had had had had had a better effect on the teacher.
[+]
KN is on excal?
awwww shiiiiiiiiiiit, i'll have to find him and uh...
do things.
awwww shiiiiiiiiiiit, i'll have to find him and uh...
do things.
Fyyvoaa said: »
KN is on excal?
awwww shiiiiiiiiiiit, i'll have to find him and uh...
do things.
awwww shiiiiiiiiiiit, i'll have to find him and uh...
do things.
[+]
Yatenkou tried to set me on fire, Dameion and Kali pulled me into the Gilgamesh fight and saved me.
Schizm Gallantry said: »
Jetackuu said: »
Schizm Gallantry said: »
:| gEDA is a PCB design program like KiCAD, but it's free.
So I am putting in some setups and it's making my PCB board design for me. I really wonder what format these files are saved in and if I can just send this information to a company and tell them to make me 20 of these boards.
It would make life so much easier....
So I am putting in some setups and it's making my PCB board design for me. I really wonder what format these files are saved in and if I can just send this information to a company and tell them to make me 20 of these boards.
It would make life so much easier....
http://www.expresspcb.com/
I've used this software, and if I remember correctly they even have a manufacturing service.
edit: if you want some simulation software, I can upload it to my server and PM you the details.
edit2: as for the expresspcb printing service, my old prof used it a few times and was rather pleased, saved him the trouble of having to manufacturer the boards himself in his shop.
I checked the site out, it's alittle pricey if I want to get more than 3+ PCB made. Plus, I would be afraid if they question what they are printing.
I was thinking of getting some mini SD cart boards for NES so you can load roms on and just plug the card into the NES with all your roms. Even though it's just the PCB fingerboard, I think they wouldn't want to make it.
Yeah, but you'll run into that problem with just about any company. They'll not want to do anything illegal, but aside from that I don't foresee them asking too many question about having some prototype boards made. Now the question would be is if you're making that many if they'd be legal to resell without going through proper testing, that may land you in more trouble really.
I've considered having a flash cart printed before, just never bothered to look fully into it. My main concern with this right now is that I know for timing most SNES boards are CF, due to the speed, I wasn't aware that they had SD NES boards, and I wonder how they'd compare.
Thinking of updating my avatar.
Any suggestions?
Any suggestions?
Bloodrose said: »
Thinking of updating my avatar.
Any suggestions?
Any suggestions?
Or perhaps Ron Swanson.
A pig wearing a hat?
Me riding a kangaroo.
Spaghetti.
Fyyvoaa said: »
KN is on excal?
awwww shiiiiiiiiiiit, i'll have to find him and uh...
do things.
awwww shiiiiiiiiiiit, i'll have to find him and uh...
do things.
Schizm Gallantry said: »
Jetackuu said: »
I've considered having a flash cart printed before, just never bothered to look fully into it. My main concern with this right now is that I know for timing most SNES boards are CF, due to the speed, I wasn't aware that they had SD NES boards, and I wonder how they'd compare.
I wouldn't make them to sell, I would make them if someone asked for one.
The SD carts have been around for several years. It's just you'll need an top loading NES or clone. I don't think they went into making the CIC chip for it.
But the one I wish I could track down was the PS1 one where you can load anything and it'll run it. But I think you were removing the laser and hooking the SD/USB card into the system.
I just found it odd that the NES could take SD when all of the SNES carts I've seen use CF and for a reason, was just odd in my head.
But yeah, as long as you're breaking even, and it's not public, don't see any issue. You could always call up the place and see if they have any requirements on the specs you send, limitations, etc.
I haven't looked up the different prices, but I just know that the person I know who has used their services has been in electronics for decades, and enjoyed the service.
I am thinking... Josi should help me with a skrimish GK and sword on Thursday, lol. I will pay ya! 5 millon each!
Sir Josi saves my bacon... Again! Thank ya sir.
All FFXI content and images © 2002-2024 SQUARE ENIX CO., LTD. FINAL
FANTASY is a registered trademark of Square Enix Co., Ltd.