My first time trying the itemset command. Hope it turns out right.
I don't use spellcast (never could make head or tail of all the garble), and I use a <wait> command to put in my Orison Locket and change to Cure+ torque.
With the addition of the Cure+24 staff, its not a bad idea to downgrade from Fylgia Torque +1 if you have it and pocket the difference.
I like this set because it essentially gives a 1/20 chance of an insta-cast Cure firing off. Also, it has a pretty good spread of stats. A little low on the -Emnity though.
Cheap Upgrade To My Cure Set
Cheap upgrade to my cure set
Leviathan.Jackieolivas said: »
I don't use spellcast (never could make head or tail of all the garble)
I thought that for the longest time and wouldn't go near it, but then I reluctantly gave it a go and for the most part you can find one done by a good WHM and just substitute their gear for yours.
Leviathan.Draylo said: »
Bahamut.Cuelebra said: »
Mahoro577 said: »
Bahamut.Cuelebra said: »
Mahoro577 said: »
I like your sets. It seems I can no longer have a precast set for Cures. They fire too quickly and my potency gear does not seem to equip right. I use Windower macros too but even putting in pauses and waits doesn't seem to work.
<if Spell="Cure*|Curaga*|Cura*|Cura III">
<action type="precastdelay" delay=".1" />
<action type="castdelay" delay=".3"/>
<action type="equip" when="precast" set="FastCastCure" />
<action type="equip" when="midcast" set="Cure" />
</if>
should fix your precast problem.
That is Spellcast though no? I use Windower macros.
Yes SC. i think /wait 1 would be too long in windower. if ur using windower id download SC. it really helps u a lot as WHM.
It is too long unfortunately.
/wait 0.1 or /wait 0.3 works in windower scripting though
All FFXI content and images © 2002-2024 SQUARE ENIX CO., LTD. FINAL
FANTASY is a registered trademark of Square Enix Co., Ltd.